![Echonautics Bronze Stem Thru-Hull CW Dual-Frequency Transducer w/Fairing Block - 600W, 50/200 kHz [CB101D600CW-FB]](http://www.tetronmarinestore.com/cdn/shop/files/107819XL.jpg?v=1739422626&width=1500)
Echonautics Bronze Stem Thru-Hull CW Dual-Frequency Transducer w/Fairing Block - 600W, 50/200 kHz [CB101D600CW-FB]
Echonautics Bronze Stem Thru-Hull CW Dual-Frequency Transducer w/Fairing Block - 600W, 50/200 kHz [CB101D600CW-FB] est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Impossible de charger la disponibilité pour le Service de retrait
Informations d'entretien
Informations d'entretien
Veuillez suivre les recommandations d'entretien du fabricant fournies dans le manuel du produit.
Livraison et expédition
Livraison et expédition
Toutes les commandes passées avant 16 h HNE seront expédiées le même jour tant que tout ce qui est demandé est actuellement en stock.
L'expédition se ferait soit via UPS, Postes Canada ou USPS.
Toutes les commandes en dehors des États-Unis peuvent entraîner des frais de douane de votre pays.
Bronze Stem Thru-Hull CW Dual-Frequency Transducer with Fairing Block - 600W, 50/200 kHz
The cost-effective choice is to get target detail in shallow water as well as good deep-water bottom tracking.
The Echonautics CB101D600 is a stem-thru hull dual frequency CW transducer with a 600W power rating, in bronze housing.
The Fairing Block offers reliable and accurate sonar performance. High-speed performance will increase with high-performance fairing.
Specifications:
- Transducer: Dual Frequency CW
- Frequency: 50-200 kHz
- Beamwidth: 42 degrees/11 degrees
- Power: 600W
- Mount: Thru-hull with fairing
- Material: Bronze
*Warning: Do not install bronze housing into metal hulls.
Fairing Block
Echonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the installation of any traditional stem transducers to the vessel's hull to protect the transducer and guarantee excellent performance while the vessel is underway. The fairing block helps to ensure a bubble-free flow of water across the face of the transducer.
Fairing blocks are required for the transducer to match the deadrise angle at the vessel mounting location. The fairing block is used to match the deadrise angle by orienting the transducer's sound beam straight down by mounting the transducer parallel to the water surface.
Echonautics high-performance fairing blocks are made of high-impact polymer and designed for excellent transducer performance even at speeds above 15kn (17MPH).
Paiement et sécurité
Méthodes de payement
Vos informations de paiement sont traitées de manière sécurisée. Nous ne stockons pas les détails de votre carte de crédit et n'avons pas accès aux informations de votre carte de crédit.
Une marque pour vous
